01

Connect each damper to a hood

Assign a branch ID and show its hood and damper on the duct drawing. Record position as indicated by the actual hardware, such as a scale mark, and keep a photo if the scale is difficult to read.

Hood ID · Damper ID · Position mark
Original diagram: Hood ID · Damper ID · Position mark
02

Keep the measurement context

Record the active hoods, fan speed, filter condition and airflow measurement locations. These details let the next technician compare the current system with the tested configuration. Recheck branch airflow when a duct or hood changes.

Active hoods · Fan speed · Measured airflow
Original diagram: Active hoods · Fan speed · Measured airflow
03

FAQ: Does the same damper position guarantee the same airflow?

No. Changes in filter resistance, fan speed or other branches can alter the airflow at the same position. Use a measurement to confirm the result.

Technical sources and editorial note

Technical concepts are independently summarized from the sources below; the quotation checklist is editorial guidance. The EPA manual is a historical engineering reference, not a current price guide or a statement of local compliance. Images are equipment references from the existing Kuohai website library, not evidence of a particular performance result. Sources reviewed on 2026-11-15.

Related equipment: Pulse jet baghouse dust collectors · Dust collector filter bags

Use this guide to prepare for an equipment discussion. Confirm selection and operating requirements against your actual process and site conditions.